Premium Mag drills online provider in the United Kingdom 2023 by weldingsuppliesdirect.co.uk

High quality Etching Laser online supplier UK in 2023 by WeldingSuppliesDirect: Generally, shielded metal arc welding machines work on the principle of heat produced by an electric arc. These are also known as stick welding, which uses an electric current flowing through the gap between the metal and welding stick (filler rod). SMAW machines are operated by both AC and DC currents. The machine uses a filler rod that is covered with a flux which prevents oxidation and contamination by producing carbon dioxide gas during the welding process. SMAW welders are considered budget-friendly and economical compared to other machines. These welding machines are used for welding processes in the maintenance and repair industry.

This drill, though not quite as advanced as our top pick, will be an excellent addition to your arsenal. It is a lightweight mag drill that comes with a swivel base magnet, making it easy to use during horizontal or overhead jobs. The HMD904S has a powerful 7.2A motor and you can drill holes with a diameter of up to 1.5” and up to 2” deep. This drill is incredibly versatile and features a two-stage magnet that increases power by up to 30%. The drill is also fitted with a pilot light, making it possible to do accurate work, even in conditions with inadequate lighting. For added convenience and accuracy, the drill is fitted with a slot drive arbor, making it quicker to change out accessories. This drill is designed for industrial and heavy-duty applications. You will be able to drill thousands of holes with no problems whatsoever. As a versatile tool, this drill is perfect for the casual handyman as well as the professional steelworker.

Welding Supplies Direct stock a wide range of mag drills from industry leading manufacturers such as JEI Solutions, Alfra, Rix Tools, FEIN & Holemaker Technology. Our flagship mag drill partner, JEI Solutions, have a range that is suitable for every drilling / broaching application; be it low profile applications, on-site cutting for structural jobs or simple at home, DIY drilling. The HMT VersaDrive V35 is a British made 35MM mag drill that is available in both 110V & 230V input voltages. It has a 35MM maximum cut capacity with a 110MM maximum cutter length and is perfect for all drilling applications, especially structural steelworks. See more information on Mag drills online shopping.

Important Industrial Gas Cylinder Safety Guidelines to Keep in Mind: Acetylene and oxygen are two industrial gases widely used across various industries. The cylinders accommodating these gases are designed with user’s safety in mind. However, that is not enough to ensure optimum safety in an industrial facility. The following factors will help ensure the same: Understand the Cylinder Properly: A personnel should be familiar with the potential risks and hazards associated with compressed gases while handling them. It is important to understand the properties of the gas filled within such as toxicity, flammability limits, and toxicity – Threshold Limit Value (TLV). Also, it is important to understand the hazards posed by gas at low temperature, high pressure or due to the physical state of the gas – non-liquefied or liquefied, etc. A personnel should read the contents of the label on the cylinder. If the label is missing or not easily readable, then the cylinder should not be used. In addition to improving a personnel’s understanding on oxygen cylinder safety or acetylene cylinder safety, he should be administered a proper plant safety training.

If you’re looking for a wheel that can quickly and easily cut through metal, the Cut Off Wheel Metal is the ideal option. This pack contains 25 of Benchmark’s 6? Aluminium Oxide Quality Thin Cut Off Wheels for metal and inox steel work. They are designed for use with an angle grinder or any other cutting device that accepts 7/8 inch arbor attachments. Benchmark offers a quality abrasive wheel with a thin 0.045-inch design, which is for fast and burr-free cutting. A proprietary aluminum oxide grain combination of the wheel provides an aggressive cutting action and the double fiberglass mesh only serves to reinforce its safety and durability. This product is made of the best strength, high cut-rate, bonded abrasive discs used for cutting metal including steel, cast iron, and stainless steel. You should use all necessary protective gear when you are using these discs. Additionally, the Benchmark Abrasives 6 inch Cut Off Wheels Metal For Angle Grinder can achieve speeds up to 11,000 RPM, which allows it to cut through materials quickly and easily. The cut-off wheel has a diameter of 6 inches and is compatible with all angle grinders that have a 7/8-inch shank.

The Hobart Ironman 240 is the updated version to the Ironman 230 that recently has been discontinued. The 240 is a well-reviewed welder that delivers a wide range of power from 30 to 280 amps in a heavy-duty American-made chassis. Hobart equips the Ironman series with its “soft arc” technology for an easier striking, more spatter-free arc. If you are looking to weld aluminum, then like most of their MIG welders, they offer the package with a SpoolRunner 200 spool gun found here, for a few hundred extra bucks. This is a full-sized platform, offering a 15-foot gun connection and able to load a 44-pound spool of wire. Hobart backs the Ironman 240 with a strong five-year limited warranty. The power regulator has 12 notch settings for easy feel when setting the power level with gloves. This power regulator knob seems to be a problem for some users who have reported issues with the knob rotating freely and not changing the power setting. The only downside to this model is that it is unable to run directly off of a generator as it causes problems with the SCR firing timing of the welder. This makes it a bit less portable than some other welders, but nothing you can’t work around. Overall, this is a quality industrial-grade welder which is ideal for farm work which has been compared to Miller 252 – just without the digital screens and a few other features that most people wouldn’t need, but costs a lot less making it excellent value for the money.

One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.

How to pick a welder tips: Duty cycle: The advertised amperage of the machine offers a headline guide, but the duty cycle of the machine gives up the truth. Light industrial machine duty cycles can be as low as 20%, but more heavy duty MIG’s should range between 40-60%. If a 300amp MIG has 30% duty cycle for instance, it’s on the edge of acceptability. Duty cycle is determined by how many minutes out of 10, it can weld at 100%. Duty cycle testing: MIGS tested at 20 Degrees & 40 Degrees we consider good. (Beware any manufacturer who doesn’t quote an ambient temperature for testing) Manufacturer’s warranty: Always a great guide to quality. A three year warranty is good. Weld characteristics: Make sure the arc is smooth & suits your application. (Some machines are better suited at the low range and others at higher amperage range).

US tool brand DeWalt are known for making the best angle grinders, and the DCG405N is a step above the competition. Cutting the cord once and for all, this is a powerful grinder that makes use of DeWalt’s excellent XR battery system. This Dewalt angle grinder is not just a powerful cordless grinder though. The grip shape is supremely comfortable, and the whole unit weighs just 1 kg without the battery installed. You can lock-off the power switch when you need to get the grinder into awkward spots as well. This brushless angle grinder also features a host of clever safety features. I like the no-volt release to prevent accidental start-ups when a new battery is installed. The electronic brake and clutch are essential for safe operation too. The 18V brushless motor is ideal for battery use. It can make 69 cuts in ½” steel rebar when used with a 5.0 Ah battery. It doesn’t come with any batteries or one of DeWalt’s excellent TSTAK cases though, which is the case with bare power tools.

Several advices about welding equipment, MIG and TIG welders, plasma cutters. When appearance counts, TIG welding creates a high quality, clean weld that is far less likely to distort the metal by using a nonconsumable tungsten electrode. There is no need to worry about splatter because it only uses the necessary amount of filler metal needed in the welding puddle, making for the highest quality weld in every respect. However, TIG is fairly specialized and requires a good deal of training in order to master it—so make sure any TIG welder purchase is paired with a plan to take welding classes. Instead of the point and shoot simplicity of MIG welding, TIG requires the use of a foot pedal to regulate the welding process. A filler rod that is separate from the torch that must be fed in gradually. Many professional welders prefer TIG because it can weld a wide variety of metals and because of the versatility of argon gas used during TIG welding. There is no slag to block the view of the weld puddle. Argon gas can weld any metal at any thickness with TIG welding, and therefore there is no need to change the gas depending on the project.

Adjustable Extraction Tips and 150 CFM Airflow. With 110V power, the portable fume extractor can generate 150 CFM airflow with its 2.3 HP motor. You can adjust the tips of extraction as per your welding requirements. Efficient Dust Collector and Suitable for Various Welding Tasks. I’ve found the dust collector in this weld fume extractor to be quite effective. You can even buy an additional hood for specialized uses. The S130/G130 generates 75 dB sounds when it runs on full power. You can efficiently use this machine for MIG welding, GMAW, stick welding, and gas metal arc welding.

The ESAB group is owned by Colfax Corporation. Over 100 years after the company was founded, ESAB serves a global market for welding and cutting equipment. The group is organized in the regions Europe, North America, South America, Asia/Pacific and India. ESAB is represented in almost every country by subsidiaries or agents. Sales and support is established in 80 countries and there are 26 manufacturing plants across four continents. Visit the web site of your nearest ESAB office to find out more. Customers Talk, We Listen – The voice of the customer will always drive the development of our strategic plans and actions. Living this value is done by getting Customer Input and Expectations, at every opportunity, and by differentiating ourselves in How We Deliver to our customers. Innovation Defines Our Future – Individual and organizational creativity will drive breakthrough ideas for technology, products, solutions, and processes. We live this value by providing differentiated customer solutions, creating products and services that improve quality of life and environmental stewardship through Creative Thinking, and by understanding What Innovation Brings.

These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.

United Kingdom market look: LONGEVITY Inc is a company that has been around since only 2001. Like LOTOS Technology, it still produces a fine enough quality welder that it has earned its spot on this list. Besides the gas cylinder, this welder comes with everything you need to get started and is simple to set up. With all this, along with its solid performance, this machine is marked at a fair price of under $400. Though it is manufactured in China, the LONGEVITY Migweld is still a quality welder. It is most well-adapted to light use. Compared to Miller and Hobart’s machines, the price is somewhat better without sacrificing much quality. It welds from 24 gauge to ¼ inches of steel. Flux core is available for this welder. The LONGEVITY can run at ten different voltage settings. As an added bonus, it has thermal overload protection like the LOTOS welder.

Forney have built a simple, mid range MIG welder that’s solid and reliable. It has some good power for the price but doesn’t have as good a duty cycle as the Hobart 190 or Lincoln 180. Forney aren’t one of the big three brands but this machine is still solidly built and I’d feel comfortable buying this. If you want a basic 220v welder without any special features, this is a good choice. Read the full review here.

Whether you’re a DIY enthusiast or a professional searching for the next piece of equipment to upgrade your business strategy, it’s safe to say that a small MIG (metal inert gas) welder can be a fantastic addition to your toolkit. The best MIG welder will give you an exceptional solution for everything from automotive work to mechanical tasks and even hobby welding. Not only do these machines deliver attractive results as a high-quality home welder, but they’re also very easy to use. Read more info at this website.

Sealey is one of the biggest manufacturers of tools and accessories in the UK, offering approximately 8000 items including tools for home, repair shops, agricultural facilities, as well as cleaning. In this variety, we found a gasless MIG welder MIGHTYMIG 100. The machine is able to weld metal sheets of a different thickness thanks to a toggle that allows setting the amperage to the minimum and maximum. The output range will be 55? and 100?, respectively. We should say that the welding time at the minimum power won’t be over 6 minutes. Yet, this welder will run for about 2 minutes at 90? and that’s great considering its moderate price. In addition, you’ll be able to manage the joint by varying the speed of the wire feed, just turn the relevant control knob to the desired setting. By the way, the welder is compatible with a flux-cored wire up to 0.9 mm, and the weight of the spool should be 0.9 kg. Like most welding tools, it features an overheating protection, and the orange light will notify you when the welder gets overheated after a long use. Apart from that, the forced air cooling system will chill the welder’s internal parts. The welder has a non-live torch for your convenience that will increase the accuracy of welding and provide safety.